Bay Networks 4000 Guide d'installation télécharger pdf (Page 87)

3-15Remote Annex 4000 Hardware Installation Guide

Chapter 3 ROM Monitor Commands

To provide remote access to the Remote Annex 4000 ROMs:

1 From a site local to the Remote Annex 4000:

❑ Put the Remote Annex in test mode so the monitor

prompt appears on the console.

❑ Set the modem to auto-answer mode.

2 From the Remote Annex 4000 console port:

❑ At the monitor prompt, enter console-baud.

❑ At the Select Baud Rate prompt, enter the appropriate

baud rate or auto.

❑ Connect the modem to the Remote Annex’s console port.

3 From the remote site:

❑ Dial into the modem connected to the Remote Annex.

❑ Press the key until the monitor prompt appears.

Retur

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 161 162

Pas de commentaire

Bay Networks 4000 Guide d'installation Page 87