Bay Networks 5000 Guide de l'utilisateur télécharger pdf (Page 11)

Palo Alto Networks Installing the Hardware • 11

Connecting Cables to the Device

2. Lift the device and position it in the rack. It is recommended that two people perform this function.

3. Align the mounting holes on the side of the device with holes in the rack rail. Make sure that rack

rail holes are selected so that the PA-5000 Series is level.

4. Insert mounting screws into the aligned holes. Tighten with a Phillips head screwdriver.

Connecting Cables to the Device

Figure 5 shows the cable connections of the PA-5060 and PA-5050. Refer to Table 1 for descriptions of

the front panel interfaces.

Before working with fiber optic cabling, read the information in “Cautions and Warnings” on page 15

related to laser radiation.

Figure 5. Cable Connections for the PA-5060 and PA-5050

1 3 5 7 9 11 13 15 17 19 21 23

2 4 6 8 10 12 14 16 18 20 22 24

USB

SFP

HA2

HA1

Console

Management

Network

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Pas de commentaire

Bay Networks 5000 Guide de l'utilisateur Page 11