Bay Networks Remote Annex Guide d'installation télécharger pdf (Page 68)

Nortel Networks 5399 Access Switch Hardware Installation Guide

Chapter 3 ROM Monitor Commands

3-2

Default or current values for parameters are displayed in brackets. For

example:

Enter broadcast address [132.245.6.255]:

Atthe prompt,enteradifferentvalue,orpress toleavethedisplayed

value unchanged.

YoucanuseuniqueabbreviationsforallROMMonitor commandsexcept

erase. For example, enter boot asbo,andenternet as n.Ifyouenteran

abbreviationthatisnotunique,anerrormessagedescribingthecommand

as ambiguous is displayed on the service port terminal.

Command Descriptions

Table 3-1 lists the ROM Monitor commands; the following subsections

describe them.

Table 3-1. ROM Monitor Commands

(continued on next page)

Return

Command Description Use

addr [-d] Displays and sets

EEPROM values

relevant to IP network

addressing, including

the unit’s IP address.

Changing IP configuration

parameters.

boot [-v] [<file>] Manually boots and

loads the unit’s

operating code.

Changing the address of

the boot image.

boot [-l] [<file>] Erases the existing

Flash memory and

copies a new image to

Flash memory.

Upgrading or replacing the

Flash image.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 125 126

Pas de commentaire

Bay Networks Remote Annex Guide d'installation Page 68