Bay Networks Remote Annex Guide d'installation télécharger pdf (Page 77)

3-11

Chapter 3 ROM Monitor Commands

Nortel Networks 5399 Access Switch Hardware Installation Guide

The next example shows a boot using tftp.TheRemoteAccess

Concentrator always tries to open a file using bfs first. If unsuccessful,

the Remote Access Concentrator uses tftp to open the file.

The next example shows a self boot.

monitor:: boot

Enter boot file name [(ip) “oper.64.enet”, \

(mop) “OPER_64_ENET.SYS”]::

Waiting for CMB Config Block Info...

Requesting default boot file “OPER_64_ENET.SYS” for MOP/VMS\

loads and “oper.64.enet” for all other protocols.

Unanswered requests shown as ‘?’,transmission errors as ‘*’.

Requesting boot from 192.9.200.88 via Ethernet...

Booting BFS file using open delay of 8

Booting TFTP file using open delay of 8

Booting TFTP file from 192.9.200.88

Header received OK. Received data blocks shown as ’.’.

................................

................?...............

................................

....*...........................

.*...................?..........

................EOF

monitor:: boot

Waiting for CMB Config Block Info...

Requesting default boot file “OPER_64_ENET.SYS” for MOP/VMS\

loads and “oper.64.enet” for all other protocols.Unanswered

requests shown as ‘?’,transmission errors as ‘*’.

Booting file: “OPER_64_ENET.SYS” from SELF

Loading image from SELF ...

.............................................................

Load Completed

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 125 126

Pas de commentaire

Bay Networks Remote Annex Guide d'installation Page 77