Bay Networks 5391 Guide d'installation télécharger pdf (Page 60)

Remote Annex 6300 Hardware Installation Guide

Chapter 3 ROM Monitor Commands

3-2

Default or current values for parameters are displayed in brackets.

For example:

Enter broadcast address [132.245.6.255]:

At the prompt, enter a different value, or press to leave the

displayed value unchanged.

You can use unique abbreviations for all ROM Monitor commands

excepterase. For example, enter boot as bo, and enter net as n. If you

enter an abbreviation that is not unique, an error message describing

the command as ambiguous is displayed on the console terminal.

Command Descriptions

Table 3-1 lists the ROM Monitor commands; the following subsections

describe them.

Table 3-1. ROM Monitor Commands

(continued on next page)

Retur

Command Description Use

addr [-d] Displays and sets

EEPROM values

relevant to IP network

addressing, including

the unit’s IP address.

Changing IP

conﬁguration

parameters.

boot [-v] [<ﬁle>] Manually boots and

loads the unit’s

operating code.

Changing the address of

the boot image.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 137 138

Pas de commentaire

Bay Networks 5391 Guide d'installation Page 60