Bay Networks 5391 Guide d'installation télécharger pdf (Page 44)

Remote Annex 2000 Hardware Installation Guide

Chapter 2 Installing the Remote Annex 2000

2-10

Figure 2-8. Connecting the Power Cord

The Remote Annex 2000 now runs its ROM-resident power-up

diagnostics. The LEDs light and then turn off, except for the

Power and some status LEDs.

2 Set the Remote Annex 2000 to Test Mode.

Pressing the button within 3 seconds of

powering up puts the Remote Annex 2000 into test

mode. To enter test mode when the Annex is already

running, hold down the button until the

Power LED blinks rapidly, then release the

button and press it again within 3 seconds. This

second method resets the Annex, so warn users

before you do it.

Test

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 135 136

Pas de commentaire

Bay Networks 5391 Guide d'installation Page 44